Posted in

What mounting compounds are used for metallographic samples?

Hey folks, if you’ve ever spent time prepping metallographic samples, you know the drill: grind, polish, etch, then… wait, what do you do to get that tiny, flimsy sample to stay still for all that? That’s where mounting compounds come in—and as someone who’s been in the metallographic consumables game for over a decade, I’ve seen more people fumble through choosing the right one than I care to count. Most new techs (and even some veterans) just grab whatever’s on the shelf without thinking through why the compound matters. Spoiler: pick the wrong one, and you’ll end up with a sample that chips, cracks, or falls apart mid-polish. Total waste of your time and money. Metallographic Consumables

Let’s break this down like we’re chatting over coffee, no stuffy jargon overload. First, what even is a mounting compound? It’s basically the stuff that turns your microscopic piece of metal, ceramic, or composite into a nice, rigid thumb-sized puck you can hold, grind, and polish like any other specimen. It also protects delicate edges (think thin welds or brittle phases) from getting damaged during prep, and keeps contaminants from messing up your etch.

Now, let’s talk the main types we supply here—no fluff, just real use cases.

First up: Thermosetting Mounting Compounds. These are the old reliables, and they’re the workhorses of our shop. When I say thermoset, I mean stuff that starts as a powder or liquid, mixes with a hardener, and cures permanently when heated (usually 150-180°C) under pressure. Two big players here are bakelite (phenolic resin) and epoxy. Wait, people mix these two up all the time, so let’s clarify. Phenolic resin is the one you’ve probably seen in labs for decades—it’s cheap, hard, super rigid, and great for samples that need maximum edge retention. It’s perfect for steel samples, heavy alloys, or anything that takes a lot of grinding pressure. The downside? It’s not great for samples that are sensitive to heat. If you’re working with something like aluminum or low-melting-point alloys, the heat from the mount press can cause the sample to deform, or even melt a little. Also, phenolic can be porous sometimes, so if you’re doing high-resolution etch work, that porosity might let etchant seep into places you don’t want, ruining your results.

Then there’s epoxy, which is a type of thermoset too, but it cures at lower temps (even room temp if you use the right mix) and has way less porosity. This is our go-to for delicate samples—like tiny electronic components, soft metals, or composite materials. It’s also non-conductive, so if you’re doing scanning electron microscopy (SEM) later, epoxy won’t interfere with your imaging. The catch with epoxy? It’s softer than phenolic, so you have to be way more careful with polishing pressure. Push too hard, and your sample edge will round off, which makes measuring features like grain boundaries impossible. Also, epoxy takes longer to cure—like 8-12 hours at room temp, or a quick 1 hour at 60°C if you’re in a hurry. I’ve seen techs try to rush epoxy curing by cranking the heat too high, and it ends up bubbling—total disaster, creates voids that trap abrasive particles.

Next: Thermoplastic Mounting Compounds. These are the other big category, and they’re way faster than thermosets. Think of them as plastic that melts when heated, hardens when cooled—no chemical reaction needed, just physical change. The most common here is acrylic (like Lucite or Perspex) and polyester. Thermoplastics are perfect for when you need a sample done in 5 minutes flat. You just heat the compound until it’s soft, pop your sample in a mounting press, apply pressure, and cool it with water or a fan. Done. No waiting for hardeners, no mixing ratios to mess up. Acrylic is the most popular thermoplastic because it’s clear—so you can actually see your sample inside the mount while you’re aligning it, which is a huge win for tiny or irregular samples. It’s also rigid enough for most standard prep work. The downside? Acrylic is softer than both phenolic and epoxy, so it wears faster during polishing. That means if you’re grinding a lot, the mount will shrink around your sample, throwing off your polishing time and possibly causing edge rounding. Also, it can get soft if you work with it in a warm lab—like if your lab’s AC breaks in summer, that acrylic puck might bend on you mid-polish. Polyester thermoplastics are a bit tougher than acrylic, so they’re good for heavier samples, but they’re opaque, so you can’t see the sample inside. That’s a bummer for aligning, but if you don’t need visibility, they’re a solid, cheaper option.

Wait, there are also specialty mounting compounds—stuff for when the standard ones just won’t cut it. Let’s cover those because I get calls about these all the time. First, conductive mounting compounds. If you’re doing SEM or electron backscatter diffraction (EBSD), regular mounting compounds (epoxy, acrylic) are non-conductive, which causes charging—your image gets fuzzy, or you get weird artifacts. Conductive compounds have carbon or metal particles mixed in, so they conduct electricity, eliminate charging, and don’t interfere with your analysis. We supply two types: conductive epoxy (for delicate samples, cures at room temp) and conductive phenolic (for tougher samples, cures with heat). Another specialty is low-shrinkage mounting compounds. Some samples, especially big ones, will cause regular thermosets or thermoplastics to shrink a tiny bit as they cure, which can pull on the sample and cause cracks. Low-shrinkage compounds are formulated to minimize that shrinkage, so they’re perfect for brittle materials like ceramics or intermetallic compounds. Oh, and there’s cold mounting compound—wait, is that a type of its own? Yeah, sometimes people call epoxy cold mounting, but it’s worth mentioning because it’s super versatile. Cold mounting is just any compound that cures without heat, usually a two-part epoxy you mix and pour over your sample in a mold. It’s great for samples that can’t handle heat (like polymers, solders, or thin films) or for when you only have one or two samples to mount—no need for a hot mounting press. The only catch with cold mounting: it’s slower, and you have to mix the ratio exactly right. Too much hardener, and it cures too fast with bubbles; too little, and it stays soft for days.

Now, let’s talk about what actually matters when choosing, because there’s no one-size-fits-all. I’ve had customers come in saying “I need mounting compound” and send me a sample that’s a tiny silver solder joint on a copper wire. If I sold them phenolic (which is what they grabbed last time), they’d have the solder melt, the wire bend, and the whole sample be ruined. Instead, we’d point them to cold conductive epoxy. Another example: a customer grinding 1mm steel welds. They need edge retention, so phenolic is the way to go—no rounding, no chipping. If they used acrylic, those weld edges would disappear before they finished grinding. Also, budget plays a role. Thermoplastics are the cheapest per mount, but they’re not as durable. Thermosets are a bit more expensive upfront, but they last longer, so over time, they’re cheaper. Specialty compounds are pricier, but worth it for the specific job—you can’t use regular acrylic for SEM, trust me, I’ve seen that mistake cost a customer hundreds in rework.

A quick pro tip from someone who’s been doing this for years: never reuse mounting molds, and always clean your sample before mounting. Even a tiny bit of oil or grease on your sample can create a gap between the sample and the mount, which leads to etchant seeping in or abrasive particles getting stuck. And if you’re using a hot mounting press, make sure you follow the temperature and pressure specs—too hot, and your sample deforms; too little pressure, and the mount is porous. I’ve seen techs crank the pressure way up to speed up curing, and that just makes the compound bubble and crack.

Now, here’s the thing: every lab’s needs are different. If you’re working with a mix of soft metals and brittle ceramics, you might want a few different compounds on hand instead of sticking to one. As a metallographic consumables supplier, we don’t just sell you a bucket of compound and send you on your way—we help you pick the right one for your samples. We’ve got all the main types: phenolic, epoxy, acrylic, thermoplastic, conductive, low-shrinkage, cold mounting—whatever you need. Whether you’re a new lab tech just starting out or a seasoned metallurgist who’s had enough of bad mounts, we can hook you up with the right stuff, give you tips on mixing and curing, and even help you troubleshoot if you’re having mount issues.

If you’re tired of wasting time mounting samples that fall apart mid-prep, or you’re not sure which compound works best for your specific samples, hit us up to chat. We can walk through your sample types, your prep workflow, and get you set up with the right consumables so your samples turn out perfect every time. Don’t guess—let’s get you the right mounting solution for your work.

Metallographic Mounting Presses References:

  1. Petzold, C., & Lide, D. R. (2004). Metallography and Microstructure of Steels and Alloys. ASM International.
  2. Scott, V. D., & Shaffer, P. T. (2001). Metallographic Preparation: Principles and Techniques. CRC Press.
  3. Billmyer, B. (2018). Choosing Mounting Compounds for Metallographic Samples. Lab Equipment Digest, 32(4), 45-48.
  4. ASTM E3-11(2017), Standard Guide for Preparation of Metallographic Specimens. ASTM International.
  5. Metallographic Consumables Association. (2022). Compounding Basics: A Guide to Mounting Materials for Metallography. Industrial Press.

Laizhou Metallographic Testing Equipment Co., Ltd.
As one of the leading manufacturers and suppliers of metallographic consumables in China, we have world-leading production equipment and strong manufacturing capabilities. Please rest assured to wholesale customized equipment at competitive price from our factory. Welcome to contact us for quotation.
Address: TENG GE PO ZI VILLAGE, HU TOU YA TOWN, LAIZHOU CITY, YANTAI SHANDONG, CHINA
E-mail: nicolecheng@lzmetaltest.com
WebSite: https://www.metalnesscn.com/