{"id":667,"date":"2026-11-03T20:51:19","date_gmt":"2026-11-03T12:51:19","guid":{"rendered":"http:\/\/www.aranciamiss.com\/blog\/?p=667"},"modified":"2026-11-03T20:51:19","modified_gmt":"2026-11-03T12:51:19","slug":"how-to-install-an-interior-slab-door-491b-76c86a","status":"publish","type":"post","link":"http:\/\/www.aranciamiss.com\/blog\/2026\/11\/03\/how-to-install-an-interior-slab-door-491b-76c86a\/","title":{"rendered":"How to install an interior slab door?"},"content":{"rendered":"<p>Hey folks, let\u2019s cut to the chase \u2013 if you\u2019ve ever stared at a plain interior slab door (you know, the solid, smooth one without any pre-drilled hardware or frames) and thought, \u201cThat looks intimidating\u201d \u2013 I get it. Back when I started my interior slab door supply business, I\u2019d get texts every week from folks who bought a slab door from us, stared at it for two days, then called me panicking about how to hang it. Sure, it\u2019s not as fancy as a pre-hung door (those come with the frame already, for newbies), but a slab door saves you so much money and hassle once you get the hang of it. And hey, I\u2019m not here to act like I\u2019m a carpentry genius \u2013 I\u2019ve messed up a few installs in my early days (once used the wrong hinge screws and had a door that would swing shut on its own), so I\u2019m passing on the real, no-BS tips I\u2019ve learned. <a href=\"https:\/\/www.dywmdoor.com\/interior-slab-door\/\">Interior Slab Door<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.dywmdoor.com\/uploads\/47750\/small\/invisible-flush-wooden-doorse7a70.jpg\"><\/p>\n<p>First off, let\u2019s set the scene: you\u2019ve got your brand new slab door from my shop (shoutout \u2013 yeah, that\u2019s us), you\u2019ve got the old door out, and your door frame is still in the wall. Wait, hold up \u2013 you can\u2019t just start measuring anything before making sure the slab is the right size for the opening. That\u2019s the number one mistake I see new installers make. Slab doors come in standard sizes, but not every opening is perfect for a standard. Let\u2019s break that down: your door\u2019s width should be exactly 2 inches narrower than the frame\u2019s rough opening (that\u2019s the gap in the wall where the frame sits), and the height should be 1.5 inches shorter. Why? Because you need room for the gap at the top (so it doesn\u2019t rub the header when you swing it) and the gap at the bottom (so you can put in a threshold if you want, or just enough space for floor cleaning, no door scraping). If your slab is too big? You can plane it down. Too small? Well, you\u2019re gonna have a bad time, so you\u2019ll either need to shim the frame or get a different slab.<\/p>\n<p>Pro tip: Grab a cheap tape measure, not the flimsy $1 one from the dollar store \u2013 trust me, the spring in those breaks mid-measure. Measure three times: top, middle, bottom of the frame, and the slab. If there\u2019s more than an 1\/8 inch difference in width between top and bottom? That means the frame\u2019s warped, and you\u2019ll need to shim it before hanging the door \u2013 otherwise, it\u2019ll swing lopsided.<\/p>\n<p>Next up, the hinges. This is where most folks go wrong. A slab door needs at least three hinges for any door over 30 inches wide, right? I always tell customers: two hinges work for tiny closet doors, but for bedrooms, bathrooms, any door that gets regular use? Three non-negotiable. And don\u2019t cheap out on the hinges \u2013 we sell 3-inch heavy-duty hinges that don\u2019t bend, way better than the thin ones that come in random hardware store packs. Now, where do you place them? Mark the top hinge 7 inches down from the top of the door, the bottom hinge 11 inches up from the bottom. If you\u2019re using three, the middle one splits the difference evenly. Wait, but don\u2019t just draw lines on the door willy-nilly \u2013 you need to mark the hinge mortises. Mortises are those little recesses in the door edge where the hinge sits, so it\u2019s flush, not sticking out.<\/p>\n<p>How to do that without a fancy router? Grab a utility knife, a chisel, and a mallet. First, lay the door flat (pro tip: put it on two sawhorses, not the floor \u2013 avoids scuffing the face). Lay a hinge on the edge, trace around it with the utility knife \u2013 press hard enough to cut through the paint\/wood, but not so hard you dig too deep. Then, use the chisel to chip out the recess. Go slow \u2013 check the hinge every few cuts to make sure it\u2019s sitting flat, no gaps. If you make a mistake? Yeah, you can sand it a bit, but better to get it right the first time. Now, do the same on the door frame \u2013 trace the hinge on the side of the frame where it\u2019ll attach, same size as the one on the door.<\/p>\n<p>Once the hinges are cut, it\u2019s time to attach the hinges to the door first, right? Don\u2019t attach them to the frame yet. Grab your drill (cordless, way easier than a corded one) and 1-inch screws (the ones that come with hinges, usually, but double-check \u2013 long enough to grip the door, not so long they poke through the other side). Screw each hinge to the door\u2019s mortise, nice and tight. Then, here\u2019s the trick: stand the door up, hold the hinges against the door frame where you want them, and have a friend hold the door steady (or use a door stop if you\u2019re alone \u2013 don\u2019t try to balance it by yourself, you\u2019ll drop it and bend a hinge). Now, mark the screw holes on the frame with a pencil \u2013 through the hinge holes, obviously. Then, drill pilot holes into the frame. If the frame is wood, a 1\/8 inch pilot hole works. If it\u2019s metal (we don\u2019t see that often for interior frames, but it happens), use a metal drill bit.<\/p>\n<p>Wait, what about shimming? I mentioned this earlier, and it\u2019s crucial. After you mark the screw holes, you\u2019ll probably notice that the frame isn\u2019t perfectly aligned \u2013 that\u2019s normal for old houses. Take thin wooden shims (or even cardboard if you\u2019re in a pinch, but shims are better) and slip them between the frame and the wall studs. Push them in until the frame is plumb (use a level \u2013 vertical, not horizontal, for the door frame). Then, when you screw the hinges to the frame, the shims will hold the frame steady, so the door doesn\u2019t sag over time. Sagging doors are the worst \u2013 they stick, they won\u2019t lock, they\u2019re just a pain. That\u2019s why skipping shims is a rookie mistake.<\/p>\n<p>Now, the door gap. Once you\u2019ve screwed the hinges in, open and close the door. Check the gaps: top, bottom, sides. They should be even \u2013 no more than 1\/8 inch all around. If the top gap is too big, you can move the top hinge up a hair. If the side near the doorknob is rubbing, you\u2019ll need to plane a little off the edge. Pro tip: use a hand plane, not a saw, for small adjustments \u2013 sawing too much will make the edge rough, and you\u2019ll have to sand it anyway. I always tell folks: take off a little at a time, test it, don\u2019t go overboard. Once it\u2019s not rubbing, great.<\/p>\n<p>Now, the doorknob and latch. This is the final step, and another place I see mess-ups. First, mark where the doorknob goes: it should be 36 inches from the bottom of the door, standard height. Grab a doorknob template (most come with the knob, or you can print one online for free) to mark the hole for the knob and the latch. Drill a 2 1\/8 inch hole for the doorknob, and a 1 inch hole for the latch, lining them up so they meet. Then, install the latch into the edge of the door, screw it in tight, attach the doorknob, and test turning it. If it doesn\u2019t line up with the latch hole in the frame? Mark the frame, drill a hole for the latch plate, screw that in.<\/p>\n<p>Wait, let\u2019s talk about common mistakes I\u2019ve seen (and made): first, not checking the slab size before buying. We sell tons of slab doors, and every month someone comes back saying \u201cI bought a 30-inch door, but it\u2019s too big for my frame\u201d \u2013 usually, the frame is actually 29 inches, so they needed a 28-inch door. Second, using the wrong screws. If you use screws that are too short, the hinges will fall off over time. Too long, and they\u2019ll poke through the frame, scratch the wall, or even come through the other side. Third, not leaving enough gaps. If the bottom gap is too small, the door will scrape the floor \u2013 that\u2019s super annoying, especially if you have carpet. If the top gap is too big, you\u2019ll see light coming through, and if you have air conditioning, it\u2019ll leak out.<\/p>\n<p>Now, a little tip from a guy who\u2019s been doing this for years: if you\u2019re hanging a door in an old house, the frame might be a little warped. Don\u2019t stress it \u2013 shimming is your friend. Even if it\u2019s not perfectly square, a few shims here and there will make the door hang straight. And if you\u2019re working alone? We sell door holders (the ones that clamp to the floor and hold the door up) that are way better than trying to balance it on a stack of books \u2013 saves your back, trust me.<\/p>\n<p>Hey, if you\u2019re still feeling overwhelmed? That\u2019s why I\u2019m here. We stock a huge range of interior slab doors in all sizes, from standard 24-inch closet doors to custom sizes for weird old homes. No more driving around to three different hardware stores, guessing at sizes, or getting stuck with a door that doesn\u2019t fit. Just shoot us a message, tell me what you need \u2013 I can even walk you through the measurements over text, no fancy phone calls required. We\u2019re not just a supply shop, we\u2019re people who\u2019ve hung dozens of these doors, so we know exactly what you\u2019re going through.<\/p>\n<p>Now, let\u2019s wrap this up. Hanging a slab door isn\u2019t rocket science \u2013 it\u2019s just about measuring right, taking your time, and not skipping the small steps (shims, hinge placement, gaps). I\u2019ve installed hundreds of these, and even the first one I did after messing up that hinge screw worked out \u2013 it just needed a little sanding and extra screws. If you\u2019re ready to get started, don\u2019t hesitate to reach out for a quote or to ask any questions. We\u2019re here to make your project easy, not another stressor.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.dywmdoor.com\/uploads\/47750\/small\/flush-to-wall-door41336.jpg\"><\/p>\n<p>Before I go, let me leave you with one last thought: slab doors are awesome because they\u2019re customizable. You can paint them any color, stain them to match your trim, even add glass panels if you want, once you\u2019ve got them hung. It\u2019s way cheaper than pre-hung doors, and you get exactly what you want. So don\u2019t let the \u201cinstall it\u201d part scare you \u2013 follow these steps, and you\u2019ll have a door that works perfectly in no time.<\/p>\n<p><a href=\"https:\/\/www.dywmdoor.com\/interior-slab-door\/invisible-door\/\">Invisible Door<\/a> References<\/p>\n<ol>\n<li>Family Handyman. &quot;How to Install a Slab Door.&quot; Family Handyman, 2023.<\/li>\n<li>Wood, Gary. The Homeowner\u2019s Guide to Door Installation. DIY Press, 2022.<\/li>\n<li>Interior Door Manufacturers Association. &quot;Best Practices for Slab Door Hanging.&quot; IDMA Technical Bulletin, 2021.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.dywmdoor.com\/\">One May Dee Show Furniture Co., Ltd.<\/a><br \/>As one of the most professional interior slab door manufacturers and suppliers in China, we are committed to providing high quality customized service with competitive price. Welcome to wholesale bulk cheap interior slab door made in China here from our factory. If you have any enquiry about quotation, please feel free to email us.<br \/>Address: Laomiao Village, Dacheng Town, Sanyuan County, Xianyang City, Shaanxi Province, China.<br \/>E-mail: trade@omdoor.com<br \/>WebSite: <a href=\"https:\/\/www.dywmdoor.com\/\">https:\/\/www.dywmdoor.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey folks, let\u2019s cut to the chase \u2013 if you\u2019ve ever stared at a plain interior &hellip; <a title=\"How to install an interior slab door?\" class=\"hm-read-more\" href=\"http:\/\/www.aranciamiss.com\/blog\/2026\/11\/03\/how-to-install-an-interior-slab-door-491b-76c86a\/\"><span class=\"screen-reader-text\">How to install an interior slab door?<\/span>Read more<\/a><\/p>\n","protected":false},"author":280,"featured_media":667,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[630],"class_list":["post-667","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-interior-slab-door-43d2-770132"],"_links":{"self":[{"href":"http:\/\/www.aranciamiss.com\/blog\/wp-json\/wp\/v2\/posts\/667","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.aranciamiss.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.aranciamiss.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.aranciamiss.com\/blog\/wp-json\/wp\/v2\/users\/280"}],"replies":[{"embeddable":true,"href":"http:\/\/www.aranciamiss.com\/blog\/wp-json\/wp\/v2\/comments?post=667"}],"version-history":[{"count":0,"href":"http:\/\/www.aranciamiss.com\/blog\/wp-json\/wp\/v2\/posts\/667\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.aranciamiss.com\/blog\/wp-json\/wp\/v2\/posts\/667"}],"wp:attachment":[{"href":"http:\/\/www.aranciamiss.com\/blog\/wp-json\/wp\/v2\/media?parent=667"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.aranciamiss.com\/blog\/wp-json\/wp\/v2\/categories?post=667"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.aranciamiss.com\/blog\/wp-json\/wp\/v2\/tags?post=667"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}