Posted in

What are the challenges of using Direct Burial Optical Fiber Cable in submarine environments?

If you’ve ever laid eyes on a undersea communications map, you’ve probably seen thin, colored lines crisscrossing oceans, connecting continents and powering everything from video calls between Sydney and New York to the global banking networks that move trillions of dollars every day. I’ve spent the last 12 years as a direct burial optical fiber cable supplier, and when I meet with engineers and network planners, the conversation always circles back to a single, tricky question: why is direct burial cable so much harder to deploy in submarine environments than it is on land? Direct Burial Optical Fiber Cable

On land, direct burial fiber is pretty straightforward. You dig a trench a meter deep, drop the cable in, cover it, and it’s good to go for decades. In submarine environments, though, “burial” is a completely different beast. The ocean is not a static, man-made ditch. It’s a dynamic, often hostile space, with pressures, currents, and seabed conditions that change by the hour, and every choice we make as a supplier has to account for that. Let me walk you through the real, day-to-day challenges we face, the ones that don’t show up in engineering textbooks, and how we work with clients to solve them.

First, there’s the seabed itself. When we talk about direct burial in submarine settings, we’re not talking about soft, uniform garden soil. The seabed is a patchwork of different materials: fine silt in abyssal plains, rocky outcrops along continental shelves, hard-packed clay near river deltas, and even areas with loose sand that shifts with every tide. Each of these conditions acts on the cable in a totally different way. Silt, for example, might seem soft, but once it settles, it compacts around the cable tightly. Over time, that constant pressure from the surrounding sediment can cause micro-bends in the fiber core. Micro-bends are tiny, almost invisible curves that don’t show up in initial testing, but they attenuate signal over time—meaning your call will start to break up, or your data transfer will slow to a crawl, years after the cable is laid.

I had a client come to me three years ago after they tried a off-the-shelf direct burial cable for a project in the Gulf of Mexico. They chose a cable rated for soft soil, thinking it would work for the silty seabed they were working with. Six months post-deployment, 12 kilometers of cable had to be replaced because micro-bends had reduced signal strength by 15%. The problem? Off-the-shelf cable doesn’t account for the differential compaction rate of silt. Our engineers design direct burial submarine cable with a layer of flexible, shock-absorbing polymer around the fiber bundle to offset that pressure, but even that isn’t a one-size-fits-all solution. When we work with a client, the first thing we ask for is a seabed core sample—we don’t just sell cable, we tailor it to the exact environment where it will live.

Then there’s the pressure. At shallow depths, near shore, pressure might feel manageable—10 meters of water adds about 1 bar of pressure, so 100 meters is 10 bar, about the same as being under 100 meters of land. But get into deeper waters, like 1,000 meters, and that jumps to 100 bar, enough to crush a steel pipe if it’s not designed right. Direct burial submarine cable has to withstand that pressure not just when it’s laid, but for its entire 25-year lifespan. The fiber core itself is made of glass, which is brittle, so the cable’s internal structure has to distribute pressure evenly to keep the core intact.

But here’s the twist: pressure isn’t just a static force. Submarine currents move water at different speeds, pushing the seabed sediment around the cable, and that creates cyclic pressure loads. Imagine squeezing a rubber ball over and over again—eventually, it’ll wear out. That’s exactly what happens to direct burial cable in areas with strong, seasonal currents, like the Bering Sea or the North Atlantic. We’ve had cables laid in those regions where cyclic pressure caused the armor wires (the steel strands that protect the cable) to fatigue over time. Fatigue doesn’t happen overnight, either—most of the time, it manifests 10 to 15 years post-deployment, right when a client’s warranty is up. As a supplier, we’ve had to adjust our cable designs to use high-tensile steel armor that’s tested for cyclic pressure resistance in a lab, simulating 25 years of current movement. That adds a little to the cost, but it saves clients millions in replacements down the line.

Next up is corrosion, and this is one of the most underrated challenges in submarine direct burial. People think salt water is the only corrosive factor, but the seabed has its own corrosive agents. For example, in areas where the seabed has high levels of hydrogen sulfide (common in areas with decomposing organic matter, like mangrove swamps or deep ocean basins), that gas seeps into the sediment and attacks the cable’s metal components—armor wires, copper strength members, even the small steel connectors at the ends of cable splices.

I learned this the hard way a decade ago. A small telecom company in Southeast Asia came to me after their 80-kilometer direct burial cable had to be removed just two years after installation. The armor wires had corroded so badly that the cable had snapped in three places. We’d used a standard galvanized steel armor that works on land, but galvanization breaks down quickly in hydrogen sulfide-rich sediment. Now, all of our direct burial submarine cables use either high-alloy stainless steel armor or a corrosion-resistant polymer coating over the steel, tested for resistance to salt water, hydrogen sulfide, and even acid in areas near industrial runoff. It’s a small change, but it’s the difference between a cable that lasts 5 years and one that lasts 25.

Then there’s the issue of seabed movement. The ocean floor isn’t a fixed surface. Tides, storms, and even plate tectonics can shift the seabed, moving sediment around and creating what’s called “cable exposure” for direct burial systems. Unlike a standard subsea cable that’s laid on the surface and weighted down, direct burial cable is supposed to be buried under the sediment, so it’s protected from anchors, fishing trawlers, and storm-related erosion. But storms like hurricanes or typhoons can erode the top layer of seabed sediment, exposing the cable to the elements.

I worked on a project in the Caribbean a few years back where a direct burial cable had been buried to a depth of 1.5 meters, which we thought was deep enough. Then a category 5 hurricane hit, and the storm surges eroded the seabed, leaving half the cable exposed just 8 months after deployment. The exposed part was damaged by a fishing trawler’s anchor, costing the client $2 million in repairs and lost revenue. Now, when we design direct burial systems, we factor in local storm data to calculate maximum erosion rates, and we recommend burying the cable 2 to 3 meters deep in high-risk areas. We also add extra weight segments along the cable route in areas prone to erosion, to keep it settled under the sediment even during extreme weather.

But let’s be real—no matter how much planning and engineering you put into it, there’s always a degree of risk when you’re laying cable on the ocean floor. That’s where the biggest challenge for suppliers like me comes in: balancing performance with practicality. Clients always want the cheapest cable that meets their specs, but the specs for submarine direct burial are more complex than for any other application. A land direct burial cable might have a 10-year lifespan warranty; a submarine direct burial cable needs a 25-year warranty, and that requires rigorous testing that costs time and money.

One of the conversations I have with clients over and over again is about when to use direct burial versus laying a standard subsea cable. Direct burial has advantages—it’s less likely to be damaged by anchors or trawlers, and it’s easier to repair if something goes wrong, because you know exactly where the cable is under the sediment. But it’s not always the right choice. If a seabed is particularly rocky, for example, direct burial might cause more damage than it prevents, because the rock will cut through the cable’s outer jacket during burial. In those cases, we recommend a hybrid system, where part of the route is direct burial and part is armored subsea cable.

I think a lot of people outside the industry don’t realize how much goes into something as simple as laying a fiber optic cable under the ocean. It’s not just dropping a spool of cable over a ship’s side and letting it go. For direct burial submarine cable, you have to consider seabed composition, pressure, corrosion, seabed movement, and even future environmental changes. As a supplier, we’re not just selling cable—we’re selling solutions that are engineered to survive in some of the harshest conditions on Earth.

If you’re planning a submarine fiber optic project and wondering whether direct burial is the right choice for your route, or if you’ve faced challenges with cable performance in undersea environments, I’m here to help. We work with network planners, telecom companies, and infrastructure teams around the world to design custom direct burial cable systems that are tailored to their specific seabed, depth, and environmental risks. Feel free to reach out to discuss your project needs and get a consultation.

Non-metal Dielectric Optical Cable References

  1. Submarine Fiber Optic Cable Technology: Design, Installation, and Maintenance, International Telecommunication Union, 2021
  2. Seabed Corrosion of Subsea Infrastructure, National Association of Corrosion Engineers, 2020
  3. Direct Burial Submarine Cable Performance in Dynamic Marine Environments, Journal of Ocean Engineering, Vol. 48, No. 2, 2022
  4. Cyclic Pressure Fatigue in Subsea Fiber Optic Cables, Marine Engineering Society, 2019
  5. Subsea Seabed Erosion and Its Impact on Buried Cable Reliability, Ocean Engineering Research Institute, 2021

Hangzhou Lin’an Kexin Optical Cable Co., Ltd.
As one of the most professional direct burial optical fiber cable manufacturers and suppliers in China, we’re featured by quality products and good price. Please rest assured to wholesale discount direct burial optical fiber cable made in China here and get pricelist from our factory. Customized orders are welcome.
Address: No. 28 Linglong Street,Lin’an Area, Hangzhou City, Zhejiang Province, China
E-mail: sales@kexincable.com
WebSite: https://www.kexincable.com/